EN 10025-2 Grade S275J2 normalized or normalized formed (+N)
"EN 10025-2 Grade S275J2 normalized or normalized formed (+N)" is a specification for structural steel. It indicates the grade, processing condition, and compliance with standards for the steel.
"EN 10025-2": This refers to the steel's compliance with the European standard EN 10025-2, which specifies technical delivery conditions for non-alloy structural steels.
"Grade S275J2": It indicates that the steel grade is S275J2, which is a low carbon, high-strength structural steel grade.
"Normalized" or "Normalized formed (+N)": This signifies that the steel has undergone normalization treatment, which involves heating the material above its critical temperature and then cooling it in still air to improve its mechanical properties.
"EN 10025-2 Grade S275J2 normalized or normalized formed (+N)" refers to structural steel that complies with the European standard EN 10025-2, has a grade of S275J2, and has been subjected to either normalization or normalized forming to enhance its mechanical properties.
The hot rolled, unalloyed quality steel S275J2 is a fine grained steel for welding constructions for dynamic loading.
The steel is not intended for heat treatment. Stress relieving annealing is allowed. Products in the delivery condition +N may be hot formed and/or normalized after delivery.
For long products and continuous rolled flats the delivery condition is up to the producer +AR, +N or +M. The delivery condition of four-high rolled sheet is also up to the producer and may be +AR or +N. Both conditions can be ordered.
For this steel are available (mat. no 1.0142, S275J2C) grades for folding, roll forming to shape and cold drawing.
The steel grade S275J2 (1.0145) replaces the steel grade S275J2G3 (1.0144) according to EN 10025 (1994-03).
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
| Density | 20 °C |
7.85 g/cm³
Show Material materials with Density of 7.85 g/cm³
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
| Elastic modulus | -100 °C |
217 GPa
Show Material materials with Elastic modulus of 217 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
212 GPa
Show Material materials with Elastic modulus of 212 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
207 GPa
Show Material materials with Elastic modulus of 207 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
199 GPa
Show Material materials with Elastic modulus of 199 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
192 GPa
Show Material materials with Elastic modulus of 192 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
184 GPa
Show Material materials with Elastic modulus of 184 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
175 GPa
Show Material materials with Elastic modulus of 175 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
164 GPa
Show Material materials with Elastic modulus of 164 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Elongation |
18.1 %
Show Material materials with Elongation of 18.1 %
|
Predicted Value, A200 | ||||
|
21.6 %
Show Material materials with Elongation of 21.6 %
|
Predicted Value, A5 | |||||
|
24.2 %
Show Material materials with Elongation of 24.2 %
|
Predicted Value, A50 | |||||
| 20 °C |
13 %
Show Material materials with Elongation of 13 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
14 %
Show Material materials with Elongation of 14 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
15 %
Show Material materials with Elongation of 15 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
15 %
Show Material materials with Elongation of 15 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
16 %
Show Material materials with Elongation of 16 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
16 %
Show Material materials with Elongation of 16 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
17 %
Show Material materials with Elongation of 17 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
17 %
Show Material materials with Elongation of 17 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
18 %
Show Material materials with Elongation of 18 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
18 %
Show Material materials with Elongation of 18 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | Transverse | |
| 20 °C |
18 %
Show Material materials with Elongation of 18 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
19 %
Show Material materials with Elongation of 19 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
19 %
Show Material materials with Elongation of 19 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | Transverse | |
| 20 °C |
19 %
Show Material materials with Elongation of 19 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
20 %
Show Material materials with Elongation of 20 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | Transverse | |
| 20 °C |
21 %
Show Material materials with Elongation of 21 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | Transverse | |
| 20 °C |
21 %
Show Material materials with Elongation of 21 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
22 %
Show Material materials with Elongation of 22 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
23 %
Show Material materials with Elongation of 23 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Hardness, Brinell |
246 [-]
Show Material materials with Hardness, Brinell of 246 [-]
|
Predicted Value, Transverse | ||||
| Poisson's ratio | 20 °C |
0.284 [-]
Show Material materials with Poisson's ratio of 0.284 [-]
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| Reduction of area |
43.5 %
Show Material materials with Reduction of area of 43.5 %
|
Predicted Value, Transverse | ||||
|
51.4 %
Show Material materials with Reduction of area of 51.4 %
|
Predicted Value | |||||
| Shear modulus |
82 GPa
Show Material materials with Shear modulus of 82 GPa
|
Typical for Low Carbon Steel | ||||
| Shear strength |
491.8 MPa
Show Material materials with Shear strength of 491.8 MPa
|
Predicted Value | ||||
| Tensile strength | 20 °C |
380 - 580 MPa
Show Material materials with Tensile strength of 380 - 580 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
380 - 560 MPa
Show Material materials with Tensile strength of 380 - 560 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
380 - 540 MPa
Show Material materials with Tensile strength of 380 - 540 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
400 - 580 MPa
Show Material materials with Tensile strength of 400 - 580 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
400 - 560 MPa
Show Material materials with Tensile strength of 400 - 560 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
400 - 540 MPa
Show Material materials with Tensile strength of 400 - 540 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
410 - 580 MPa
Show Material materials with Tensile strength of 410 - 580 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
410 - 560 MPa
Show Material materials with Tensile strength of 410 - 560 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
410 - 540 MPa
Show Material materials with Tensile strength of 410 - 540 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
430 - 580 MPa
Show Material materials with Tensile strength of 430 - 580 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
430 - 560 MPa
Show Material materials with Tensile strength of 430 - 560 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
430 - 540 MPa
Show Material materials with Tensile strength of 430 - 540 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Yield strength |
248.5 MPa
Show Material materials with Yield strength of 248.5 MPa
|
Predicted Value, RP1 | ||||
|
307.7 MPa
Show Material materials with Yield strength of 307.7 MPa
|
Predicted Value, Transverse | |||||
|
311.8 MPa
Show Material materials with Yield strength of 311.8 MPa
|
Predicted Value, RP1 Transverse | |||||
|
330.2 MPa
Show Material materials with Yield strength of 330.2 MPa
|
Predicted Value, RP05 | |||||
|
354.6 MPa
Show Material materials with Yield strength of 354.6 MPa
|
Predicted Value, RP02 | |||||
|
456.8 MPa
Show Material materials with Yield strength of 456.8 MPa
|
Predicted Value, RP02 Transverse | |||||
|
470 MPa
Show Material materials with Yield strength of 470 MPa
|
Predicted Value, RP002 | |||||
| 20 °C |
195 MPa
Show Material materials with Yield strength of 195 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
205 MPa
Show Material materials with Yield strength of 205 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
215 MPa
Show Material materials with Yield strength of 215 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
225 MPa
Show Material materials with Yield strength of 225 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
235 MPa
Show Material materials with Yield strength of 235 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
245 MPa
Show Material materials with Yield strength of 245 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
255 MPa
Show Material materials with Yield strength of 255 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
265 MPa
Show Material materials with Yield strength of 265 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
275 MPa
Show Material materials with Yield strength of 275 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
180 - 220 MPa
Show Material materials with Yield strength of 180 - 220 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
180 - 210 MPa
Show Material materials with Yield strength of 180 - 210 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
180 - 188 MPa
Show Material materials with Yield strength of 180 - 188 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
180 MPa
Show Material materials with Yield strength of 180 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
188 - 220 MPa
Show Material materials with Yield strength of 188 - 220 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
188 - 210 MPa
Show Material materials with Yield strength of 188 - 210 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
188 MPa
Show Material materials with Yield strength of 188 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
210 - 220 MPa
Show Material materials with Yield strength of 210 - 220 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
210 MPa
Show Material materials with Yield strength of 210 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
220 MPa
Show Material materials with Yield strength of 220 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
155 - 190 MPa
Show Material materials with Yield strength of 155 - 190 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
155 - 180 MPa
Show Material materials with Yield strength of 155 - 180 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
155 - 162 MPa
Show Material materials with Yield strength of 155 - 162 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
155 MPa
Show Material materials with Yield strength of 155 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
162 - 190 MPa
Show Material materials with Yield strength of 162 - 190 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
162 - 180 MPa
Show Material materials with Yield strength of 162 - 180 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
162 MPa
Show Material materials with Yield strength of 162 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
180 MPa
Show Material materials with Yield strength of 180 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
180 - 190 MPa
Show Material materials with Yield strength of 180 - 190 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
190 MPa
Show Material materials with Yield strength of 190 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
144 - 180 MPa
Show Material materials with Yield strength of 144 - 180 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
144 - 170 MPa
Show Material materials with Yield strength of 144 - 170 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
144 - 150 MPa
Show Material materials with Yield strength of 144 - 150 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
144 MPa
Show Material materials with Yield strength of 144 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
150 - 180 MPa
Show Material materials with Yield strength of 150 - 180 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
150 - 170 MPa
Show Material materials with Yield strength of 150 - 170 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
150 MPa
Show Material materials with Yield strength of 150 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
170 - 180 MPa
Show Material materials with Yield strength of 170 - 180 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
170 MPa
Show Material materials with Yield strength of 170 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
180 MPa
Show Material materials with Yield strength of 180 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
119 - 150 MPa
Show Material materials with Yield strength of 119 - 150 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
119 - 140 MPa
Show Material materials with Yield strength of 119 - 140 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
119 - 124 MPa
Show Material materials with Yield strength of 119 - 124 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
119 MPa
Show Material materials with Yield strength of 119 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
124 - 150 MPa
Show Material materials with Yield strength of 124 - 150 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
124 - 140 MPa
Show Material materials with Yield strength of 124 - 140 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
124 MPa
Show Material materials with Yield strength of 124 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
140 - 150 MPa
Show Material materials with Yield strength of 140 - 150 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
140 MPa
Show Material materials with Yield strength of 140 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
150 MPa
Show Material materials with Yield strength of 150 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 |
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
| Coefficient of thermal expansion | -100 °C |
1.08e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.08e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
1.19e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.19e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
1.25e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.25e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
1.3e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.3e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
1.36e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.36e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
1.41e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.41e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
1.45e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.45e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
1.49e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.49e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Max service temperature |
269 °C
Show Material materials with Max service temperature of 269 °C
|
Predicted Value, Long | ||||
|
500 °C
Show Material materials with Max service temperature of 500 °C
|
Typical for Carbon Steel | |||||
| Melting point |
1480 - 1526 °C
Show Material materials with Melting point of 1480 - 1526 °C
|
Typical for Low Carbon Steel | ||||
| Specific heat capacity | -100 °C |
423 J/(kg·K)
Show Material materials with Specific heat capacity of 423 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
461 J/(kg·K)
Show Material materials with Specific heat capacity of 461 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
479 J/(kg·K)
Show Material materials with Specific heat capacity of 479 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
499 J/(kg·K)
Show Material materials with Specific heat capacity of 499 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
517 J/(kg·K)
Show Material materials with Specific heat capacity of 517 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
536 J/(kg·K)
Show Material materials with Specific heat capacity of 536 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
558 J/(kg·K)
Show Material materials with Specific heat capacity of 558 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
587 J/(kg·K)
Show Material materials with Specific heat capacity of 587 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Thermal conductivity | 20 °C |
53.4 W/(m·K)
Show Material materials with Thermal conductivity of 53.4 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 100 °C |
52.9 W/(m·K)
Show Material materials with Thermal conductivity of 52.9 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
50.3 W/(m·K)
Show Material materials with Thermal conductivity of 50.3 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
46.7 W/(m·K)
Show Material materials with Thermal conductivity of 46.7 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
43.3 W/(m·K)
Show Material materials with Thermal conductivity of 43.3 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
39.8 W/(m·K)
Show Material materials with Thermal conductivity of 39.8 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
36.7 W/(m·K)
Show Material materials with Thermal conductivity of 36.7 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Thermal diffusivity | 20 °C |
14.8 mm²/s
Show Material materials with Thermal diffusivity of 14.8 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 100 °C |
13.6 mm²/s
Show Material materials with Thermal diffusivity of 13.6 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
12.1 mm²/s
Show Material materials with Thermal diffusivity of 12.1 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
10.6 mm²/s
Show Material materials with Thermal diffusivity of 10.6 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
9.2 mm²/s
Show Material materials with Thermal diffusivity of 9.2 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
7.7 mm²/s
Show Material materials with Thermal diffusivity of 7.7 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
6.2 mm²/s
Show Material materials with Thermal diffusivity of 6.2 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
| Electrical conductivity |
7 S/m
Show Material materials with Electrical conductivity of 7 S/m
|
Predicted Value | ||||
| Electrical resistivity | 20 °C |
1.95e-07 Ω·m
Show Material materials with Electrical resistivity of 1.95e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 100 °C |
2.42e-07 Ω·m
Show Material materials with Electrical resistivity of 2.42e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
3.14e-07 Ω·m
Show Material materials with Electrical resistivity of 3.14e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
4.02e-07 Ω·m
Show Material materials with Electrical resistivity of 4.02e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
5.02e-07 Ω·m
Show Material materials with Electrical resistivity of 5.02e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
6.21e-07 Ω·m
Show Material materials with Electrical resistivity of 6.21e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
7.55e-07 Ω·m
Show Material materials with Electrical resistivity of 7.55e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Property | Value | Comment |
|---|---|---|
| Curie temperature |
770 °C
Show Material materials with Curie temperature of 770 °C
|
Typical for Low Carbon Steel |
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
| Carbon |
0.18 %
Show Material materials with Carbon of 0.18 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Copper |
0.55 %
Show Material materials with Copper of 0.55 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Manganese |
1.5 %
Show Material materials with Manganese of 1.5 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Phosphorus |
0.025 %
Show Material materials with Phosphorus of 0.025 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Sulfur |
0.025 %
Show Material materials with Sulfur of 0.025 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Property | ||
|---|---|---|
| Supplier Disclaimer | The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information. | |