Structured specification reference
| Parameter | Reference / acceptance condition |
|---|---|
| Grade | S355G2 |
| Specification reference | EN 10225 (historical designation); exact edition to be agreed |
| Application boundary | Offshore structural plate; retain the exact edition and approved normalized / normalized formed condition. |
| Mechanical acceptance | Confirm thickness-dependent values in the specified product standard and heat certificate |
| Chemical acceptance | Confirm heat analysis against the exact contract edition; no automatic equivalence |
| Delivery condition | As ordered and shown on certificate; verify any legacy designation |
| Dimensions and tolerance | Product-form-specific standard and ordered class |
| Class approval | Only where expressly required and accepted for this product |
S355G2 designation and selection
S355G2 is retained from the historical EN 10225 offshore material designation used by the original site. A new project needs the exact edition and any suffixes required by its specification. Do not infer current equivalence from S355 alone, and verify whether normalized or normalizing-formed supply matches the approved requirement.
Enquiry fields for EN 10225 (historical designation) S355G2
Confirm the exact edition, product form and dimensions, final delivery condition, quantity, equipment duty and accepting authority. Ask the producer for thickness-specific mechanical requirements and the complete heat analysis. If the application is classed, specify the required approval and inspection documents before production.
Certificate review and release
Connect the specified material to the delivered heat and piece IDs, then review the results and final condition. Sampling, test temperature, specimen geometry and any supplementary examination must match the order. Resolve missing evidence before releasing the material for fabrication. A cross-reference handbook is a comparison aid; the applicable standard and accepting engineer determine the final decision.
Order parameters
- Thickness / size scope
- Product-form and contract specific
- Delivery condition
- Verify the complete grade and final condition
- Class society requested
Society names are enquiry options. Approval and certificate scope must be confirmed for the actual material.
Frequently asked questions
Is this automatically equivalent to a shipbuilding hull grade?
No. The approved application specification and accepting authority must establish suitability.
Sources and reference scope
- Procurement and editorial guidance — Cross-checked against product terminology and the cited material rules
Guidance describes checks to request. It is not a claim of available stock, certificates or completed project engineering. - Preserved original material records — Per-page origins recorded in page_origins and content-audit.csv
Legacy numeric claims are not adopted without corroboration; use for provenance and original designation only.