EN 10025-2 Grade S355K2 normalized or normalized formed (+N)
"EN 10025-2 Grade S355K2 normalized or normalized formed (+N)" is a specification for structural steel. It indicates the grade, processing condition, and compliance with standards for the steel.
"EN 10025-2": This refers to the steel's compliance with the European standard EN 10025-2, which specifies technical delivery conditions for non-alloy structural steels.
"Grade S355K2": It indicates that the steel grade is S355K2, which is a low carbon, high-strength structural steel grade.
"Normalized" or "Normalized formed (+N)": This signifies that the steel has undergone normalization treatment, which involves heating the material above its critical temperature and then cooling it in still air to improve its mechanical properties.
"EN 10025-2 Grade S355K2 normalized or normalized formed (+N)" refers to structural steel that complies with the European standard EN 10025-2, has a grade of S355K2, and has been subjected to either normalization or normalized forming to enhance its mechanical properties.
Yield strength: 355 MPa
Tensile strength: 510 MPa
Mineral wear resistance: 15% higher than S235J2
Delivery conditions: +AR, +N, or +M for long products and continuous rolled flats; +AR or +N for four-high rolled sheet
Applications: Dynamic loaded welding constructions
Here is some additional information about S355K2 steel:
It is a fine grained steel, which means that it has a small grain size. This gives the steel good mechanical properties, such as strength and ductility.
It is not intended for heat treatment. This means that it cannot be hardened or tempered. However, it can be stress relieved annealed.
It is available in a variety of delivery conditions, which means that it can be supplied in different states of processing.
It is used in a variety of applications, such as dynamic loaded welding constructions.
| Property | Temperature | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|---|
| Density | 20 °C |
7.83 g/cm³
Show Material materials with Density of 7.83 g/cm³
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
| Elastic modulus | -100 °C |
217 GPa
Show Material materials with Elastic modulus of 217 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
212 GPa
Show Material materials with Elastic modulus of 212 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
207 GPa
Show Material materials with Elastic modulus of 207 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
199 GPa
Show Material materials with Elastic modulus of 199 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
192 GPa
Show Material materials with Elastic modulus of 192 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
184 GPa
Show Material materials with Elastic modulus of 184 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
175 GPa
Show Material materials with Elastic modulus of 175 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
164 GPa
Show Material materials with Elastic modulus of 164 GPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Elongation |
17.7 %
Show Material materials with Elongation of 17.7 %
|
Predicted Value, A200 | ||||
|
19.6 %
Show Material materials with Elongation of 19.6 %
|
Predicted Value, A50 | |||||
|
22.3 %
Show Material materials with Elongation of 22.3 %
|
Predicted Value, A5 | |||||
| 20 °C |
12 %
Show Material materials with Elongation of 12 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
13 %
Show Material materials with Elongation of 13 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
14 %
Show Material materials with Elongation of 14 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
14 %
Show Material materials with Elongation of 14 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
15 %
Show Material materials with Elongation of 15 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
15 %
Show Material materials with Elongation of 15 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
16 %
Show Material materials with Elongation of 16 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 Transverse | |
| 20 °C |
16 %
Show Material materials with Elongation of 16 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
17 %
Show Material materials with Elongation of 17 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
17 %
Show Material materials with Elongation of 17 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | Transverse | |
| 20 °C |
17 %
Show Material materials with Elongation of 17 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
18 %
Show Material materials with Elongation of 18 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | A80 | |
| 20 °C |
18 %
Show Material materials with Elongation of 18 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | Transverse | |
| 20 °C |
18 %
Show Material materials with Elongation of 18 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
19 %
Show Material materials with Elongation of 19 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | Transverse | |
| 20 °C |
20 %
Show Material materials with Elongation of 20 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | Transverse | |
| 20 °C |
20 %
Show Material materials with Elongation of 20 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
21 %
Show Material materials with Elongation of 21 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
22 %
Show Material materials with Elongation of 22 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Hardness, Brinell |
243 [-]
Show Material materials with Hardness, Brinell of 243 [-]
|
Predicted Value, Transverse | ||||
| Poisson's ratio |
0.29 [-]
Show Material materials with Poisson's ratio of 0.29 [-]
|
Typical for Low Carbon Steel | ||||
| Reduction of area |
44.0 %
Show Material materials with Reduction of area of 44.0 %
|
Predicted Value, Transverse | ||||
|
52.7 %
Show Material materials with Reduction of area of 52.7 %
|
Predicted Value | |||||
| Shear modulus |
82 GPa
Show Material materials with Shear modulus of 82 GPa
|
Typical for Low Carbon Steel | ||||
| Shear strength |
513.8 MPa
Show Material materials with Shear strength of 513.8 MPa
|
Predicted Value | ||||
| Tensile strength | 20 °C |
450 - 680 MPa
Show Material materials with Tensile strength of 450 - 680 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
450 - 630 MPa
Show Material materials with Tensile strength of 450 - 630 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
450 - 600 MPa
Show Material materials with Tensile strength of 450 - 600 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
470 - 680 MPa
Show Material materials with Tensile strength of 470 - 680 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
470 - 630 MPa
Show Material materials with Tensile strength of 470 - 630 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
470 - 600 MPa
Show Material materials with Tensile strength of 470 - 600 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
510 - 680 MPa
Show Material materials with Tensile strength of 510 - 680 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
510 - 630 MPa
Show Material materials with Tensile strength of 510 - 630 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
510 - 600 MPa
Show Material materials with Tensile strength of 510 - 600 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Yield strength |
243.9 MPa
Show Material materials with Yield strength of 243.9 MPa
|
Predicted Value, RP1 | ||||
|
308.5 MPa
Show Material materials with Yield strength of 308.5 MPa
|
Predicted Value, RP1 Transverse | |||||
|
367.7 MPa
Show Material materials with Yield strength of 367.7 MPa
|
Predicted Value, Transverse | |||||
|
379.8 MPa
Show Material materials with Yield strength of 379.8 MPa
|
Predicted Value, RP05 | |||||
|
420.8 MPa
Show Material materials with Yield strength of 420.8 MPa
|
Predicted Value, RP02 | |||||
|
477.7 MPa
Show Material materials with Yield strength of 477.7 MPa
|
Predicted Value, RP02 Transverse | |||||
|
480.2 MPa
Show Material materials with Yield strength of 480.2 MPa
|
Predicted Value, RP002 | |||||
| 20 °C |
265 MPa
Show Material materials with Yield strength of 265 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
275 MPa
Show Material materials with Yield strength of 275 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
285 MPa
Show Material materials with Yield strength of 285 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
295 MPa
Show Material materials with Yield strength of 295 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
315 MPa
Show Material materials with Yield strength of 315 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
325 MPa
Show Material materials with Yield strength of 325 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
335 MPa
Show Material materials with Yield strength of 335 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
345 MPa
Show Material materials with Yield strength of 345 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 20 °C |
355 MPa
Show Material materials with Yield strength of 355 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
194 - 254 MPa
Show Material materials with Yield strength of 194 - 254 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
194 - 249 MPa
Show Material materials with Yield strength of 194 - 249 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
194 - 234 MPa
Show Material materials with Yield strength of 194 - 234 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
194 - 224 MPa
Show Material materials with Yield strength of 194 - 224 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
194 - 214 MPa
Show Material materials with Yield strength of 194 - 214 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
194 MPa
Show Material materials with Yield strength of 194 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
214 - 254 MPa
Show Material materials with Yield strength of 214 - 254 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
214 - 249 MPa
Show Material materials with Yield strength of 214 - 249 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
214 - 234 MPa
Show Material materials with Yield strength of 214 - 234 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
214 - 224 MPa
Show Material materials with Yield strength of 214 - 224 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
214 MPa
Show Material materials with Yield strength of 214 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
224 - 254 MPa
Show Material materials with Yield strength of 224 - 254 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
224 - 249 MPa
Show Material materials with Yield strength of 224 - 249 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
224 - 234 MPa
Show Material materials with Yield strength of 224 - 234 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
224 MPa
Show Material materials with Yield strength of 224 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
234 - 254 MPa
Show Material materials with Yield strength of 234 - 254 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
234 - 249 MPa
Show Material materials with Yield strength of 234 - 249 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
234 MPa
Show Material materials with Yield strength of 234 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
249 - 254 MPa
Show Material materials with Yield strength of 249 - 254 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
249 MPa
Show Material materials with Yield strength of 249 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 100 °C |
254 MPa
Show Material materials with Yield strength of 254 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
166 - 226 MPa
Show Material materials with Yield strength of 166 - 226 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
166 - 221 MPa
Show Material materials with Yield strength of 166 - 221 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
166 - 206 MPa
Show Material materials with Yield strength of 166 - 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
166 - 196 MPa
Show Material materials with Yield strength of 166 - 196 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
166 - 186 MPa
Show Material materials with Yield strength of 166 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
166 MPa
Show Material materials with Yield strength of 166 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
186 - 226 MPa
Show Material materials with Yield strength of 186 - 226 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
186 - 221 MPa
Show Material materials with Yield strength of 186 - 221 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
186 - 206 MPa
Show Material materials with Yield strength of 186 - 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
186 - 196 MPa
Show Material materials with Yield strength of 186 - 196 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
186 MPa
Show Material materials with Yield strength of 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
196 - 226 MPa
Show Material materials with Yield strength of 196 - 226 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
196 - 221 MPa
Show Material materials with Yield strength of 196 - 221 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
196 - 206 MPa
Show Material materials with Yield strength of 196 - 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
196 MPa
Show Material materials with Yield strength of 196 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
206 - 226 MPa
Show Material materials with Yield strength of 206 - 226 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
206 - 221 MPa
Show Material materials with Yield strength of 206 - 221 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
206 MPa
Show Material materials with Yield strength of 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
221 - 226 MPa
Show Material materials with Yield strength of 221 - 226 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
221 MPa
Show Material materials with Yield strength of 221 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 200 °C |
226 MPa
Show Material materials with Yield strength of 226 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
146 - 206 MPa
Show Material materials with Yield strength of 146 - 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
146 - 202 MPa
Show Material materials with Yield strength of 146 - 202 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
146 - 186 MPa
Show Material materials with Yield strength of 146 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
146 - 176 MPa
Show Material materials with Yield strength of 146 - 176 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
146 - 166 MPa
Show Material materials with Yield strength of 146 - 166 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
146 MPa
Show Material materials with Yield strength of 146 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
166 - 206 MPa
Show Material materials with Yield strength of 166 - 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
166 - 186 MPa
Show Material materials with Yield strength of 166 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
166 MPa
Show Material materials with Yield strength of 166 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
166 - 202 MPa
Show Material materials with Yield strength of 166 - 202 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
166 - 176 MPa
Show Material materials with Yield strength of 166 - 176 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
176 - 206 MPa
Show Material materials with Yield strength of 176 - 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
176 - 202 MPa
Show Material materials with Yield strength of 176 - 202 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
176 - 186 MPa
Show Material materials with Yield strength of 176 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
176 MPa
Show Material materials with Yield strength of 176 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
186 - 206 MPa
Show Material materials with Yield strength of 186 - 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
186 MPa
Show Material materials with Yield strength of 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
186 - 202 MPa
Show Material materials with Yield strength of 186 - 202 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
202 - 206 MPa
Show Material materials with Yield strength of 202 - 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
202 MPa
Show Material materials with Yield strength of 202 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 250 °C |
206 MPa
Show Material materials with Yield strength of 206 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
126 - 186 MPa
Show Material materials with Yield strength of 126 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
126 - 181 MPa
Show Material materials with Yield strength of 126 - 181 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
126 - 166 MPa
Show Material materials with Yield strength of 126 - 166 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
126 - 156 MPa
Show Material materials with Yield strength of 126 - 156 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
126 - 146 MPa
Show Material materials with Yield strength of 126 - 146 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
126 MPa
Show Material materials with Yield strength of 126 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
146 - 186 MPa
Show Material materials with Yield strength of 146 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
146 - 166 MPa
Show Material materials with Yield strength of 146 - 166 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
146 MPa
Show Material materials with Yield strength of 146 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
146 - 181 MPa
Show Material materials with Yield strength of 146 - 181 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
146 - 156 MPa
Show Material materials with Yield strength of 146 - 156 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
156 - 186 MPa
Show Material materials with Yield strength of 156 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
156 - 181 MPa
Show Material materials with Yield strength of 156 - 181 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
156 - 166 MPa
Show Material materials with Yield strength of 156 - 166 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
156 MPa
Show Material materials with Yield strength of 156 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
166 - 186 MPa
Show Material materials with Yield strength of 166 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
166 MPa
Show Material materials with Yield strength of 166 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
166 - 181 MPa
Show Material materials with Yield strength of 166 - 181 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
181 - 186 MPa
Show Material materials with Yield strength of 181 - 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
181 MPa
Show Material materials with Yield strength of 181 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | |||
| 300 °C |
186 MPa
Show Material materials with Yield strength of 186 MPa
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 |
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
| Coefficient of thermal expansion | -100 °C |
1.08e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.08e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
1.19e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.19e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
1.25e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.25e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
1.3e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.3e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
1.36e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.36e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
1.41e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.41e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
1.45e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.45e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
1.49e-05 1/K
Show Material materials with Coefficient of thermal expansion of 1.49e-05 1/K
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Max service temperature |
305.4 °C
Show Material materials with Max service temperature of 305.4 °C
|
Predicted Value, Long | ||||
|
500 °C
Show Material materials with Max service temperature of 500 °C
|
Typical for Carbon Steel | |||||
| Melting point |
1480 - 1526 °C
Show Material materials with Melting point of 1480 - 1526 °C
|
Typical for Low Carbon Steel | ||||
| Specific heat capacity | -100 °C |
423 J/(kg·K)
Show Material materials with Specific heat capacity of 423 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
461 J/(kg·K)
Show Material materials with Specific heat capacity of 461 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
479 J/(kg·K)
Show Material materials with Specific heat capacity of 479 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
499 J/(kg·K)
Show Material materials with Specific heat capacity of 499 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
517 J/(kg·K)
Show Material materials with Specific heat capacity of 517 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
536 J/(kg·K)
Show Material materials with Specific heat capacity of 536 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
558 J/(kg·K)
Show Material materials with Specific heat capacity of 558 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
587 J/(kg·K)
Show Material materials with Specific heat capacity of 587 J/(kg·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Thermal conductivity | -100 °C |
37.6 W/(m·K)
Show Material materials with Thermal conductivity of 37.6 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
42.2 W/(m·K)
Show Material materials with Thermal conductivity of 42.2 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
43.2 W/(m·K)
Show Material materials with Thermal conductivity of 43.2 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
42.9 W/(m·K)
Show Material materials with Thermal conductivity of 42.9 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
41.2 W/(m·K)
Show Material materials with Thermal conductivity of 41.2 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
39.1 W/(m·K)
Show Material materials with Thermal conductivity of 39.1 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
36.6 W/(m·K)
Show Material materials with Thermal conductivity of 36.6 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
34.1 W/(m·K)
Show Material materials with Thermal conductivity of 34.1 W/(m·K)
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| Thermal diffusivity | -100 °C |
12.9 mm²/s
Show Material materials with Thermal diffusivity of 12.9 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
11.7 mm²/s
Show Material materials with Thermal diffusivity of 11.7 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
11.2 mm²/s
Show Material materials with Thermal diffusivity of 11.2 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
10.3 mm²/s
Show Material materials with Thermal diffusivity of 10.3 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
9.4 mm²/s
Show Material materials with Thermal diffusivity of 9.4 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
8.3 mm²/s
Show Material materials with Thermal diffusivity of 8.3 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
7.1 mm²/s
Show Material materials with Thermal diffusivity of 7.1 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
5.7 mm²/s
Show Material materials with Thermal diffusivity of 5.7 mm²/s
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
| Electrical conductivity |
7 S/m
Show Material materials with Electrical conductivity of 7 S/m
|
Predicted Value | ||||
| Electrical resistivity | -100 °C |
1.82e-07 Ω·m
Show Material materials with Electrical resistivity of 1.82e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | |
| 20 °C |
2.47e-07 Ω·m
Show Material materials with Electrical resistivity of 2.47e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 100 °C |
2.96e-07 Ω·m
Show Material materials with Electrical resistivity of 2.96e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 200 °C |
3.68e-07 Ω·m
Show Material materials with Electrical resistivity of 3.68e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 300 °C |
4.55e-07 Ω·m
Show Material materials with Electrical resistivity of 4.55e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 400 °C |
5.56e-07 Ω·m
Show Material materials with Electrical resistivity of 5.56e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 500 °C |
6.75e-07 Ω·m
Show Material materials with Electrical resistivity of 6.75e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire | ||
| 600 °C |
8.13e-07 Ω·m
Show Material materials with Electrical resistivity of 8.13e-07 Ω·m
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Property | Value | Comment |
|---|---|---|
| Curie temperature |
770 °C
Show Material materials with Curie temperature of 770 °C
|
Typical for Low Carbon Steel |
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
| Carbon |
0.2 %
Show Material materials with Carbon of 0.2 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Copper |
0.55 %
Show Material materials with Copper of 0.55 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Manganese |
1.6 %
Show Material materials with Manganese of 1.6 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Phosphorus |
0.025 %
Show Material materials with Phosphorus of 0.025 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Silicon |
0.55 %
Show Material materials with Silicon of 0.55 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Sulfur |
0.025 %
Show Material materials with Sulfur of 0.025 %
|
normalized or normalized formed (+N) | EN 10025-2, EN 10025 | Strip, Sheet, Flat, Rod, Wire |
| Property | ||
|---|---|---|
| Supplier Disclaimer | The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information. | |